Last Modified: 11-29-2007 1.6 A
Service Category: Drivetrain Section: Automatic Transmission/Transaxle
Model Year: 2008 Model: Sequoia Doc ID: RM000001BZB00YX
Title: A750F AUTOMATIC TRANSMISSION / TRANSAXLE: AIR COOLED OIL COOLER: INSTALLATION (2008 Sequoia)

INSTALLATION

1. INSTALL NO. 1 TRANSMISSION OIL COOLER HOSE

(a) Install the 2 No. 1 transmission oil cooler hoses with the 2 clips.

2. INSTALL NO. 2 OIL COOLER TUBE SUB-ASSEMBLY

(a) Connect the No. 2 oil cooler tube sub-assembly to the 2 No. 1 transmission oil cooler hoses with the 2 clips.

(b) Install the No. 2 oil cooler tube sub-assembly with the bolt.

Torque: 4.9 N·m (50 kgf·cm, 43 in·lbf)

3. INSTALL TRANSMISSION OIL COOLER AIR DUCT

(a) Install the No. 1 oil cooler air duct and No. 2 oil cooler air duct with the 4 bolts.

Torque: 5.0 N·m (51 kgf·cm, 44 in·lbf)

4. INSTALL RADIATOR SUPPORT TO FRAME SEAL RH

(a) Install the radiator support to frame seal RH with the 2 clips.

5. INSTALL AIR COOLED OIL COOLER ASSEMBLY

(a) Install the oil cooler support bracket with the 2 bolts.

Torque: 12 N·m (122 kgf·cm, 9 ft·lbf)


(b) Temporarily place the air cooled oil cooler assembly on the radiator support.

HINT:

Securely attach the claw of the oil cooler support bracket into the hole of the radiator support.

(c) Install the air cooled oil cooler assembly with the 3 bolts.

Torque: 14 N·m (143 kgf·cm, 10 ft·lbf)

6. INSTALL OIL COOLER TUBE

(a) Install the oil cooler tube with the 2 bolts.

Torque: 14 N·m (143 kgf·cm, 10 ft·lbf)

7. INSTALL NO. 1 OIL COOLER HOSE

(a) Install the inlet No. 1 oil cooler hose and outlet No. 1 oil cooler hose with the 4 clips.

HINT:

  • Make sure the pinching portion of each clip is facing the direction shown in the illustration.
  • Make sure the paint portion of each hose is facing outward.

(b) Pass the 2 hoses through the No. 1 flexible hose clamp and close the clamp.

8. INSTALL NO. 2 TRANSMISSION OIL COOLER HOSE

(a) Install the 2 No. 2 transmission oil cooler hoses with the 4 clips.

HINT:

Make sure the pinching portion of each clip is facing the direction shown in the illustration.

9. INSTALL FRONT BUMPER ASSEMBLY

(a) Install the front bumper assembly EXTERIOR PANELS / TRIM: FRONT BUMPER: INSTALLATION (2008 Sequoia) .

10. ADJUST AUTOMATIC TRANSMISSION FLUID

(a) Adjust automatic transmission fluid A750F AUTOMATIC TRANSMISSION / TRANSAXLE: AUTOMATIC TRANSMISSION FLUID: ADJUSTMENT (2008 Sequoia) .

11. INSPECT FOR AUTOMATIC TRANSMISSION FLUID LEAK